AMF 6108LA-20-08 built-in clamping module for automation

Application

Zero-point clamping system for automation solutions, for clamping with optimised setup time for machining and chipless machining.

Execution

• Centric blow-out, support control, opening and locking control
• Pneumatic opening.
• Pneumatic blow-out.
• Operating pressure for opening:
• KP5.3: min. 5 bar to max. 12 bar.
• KP10.3: min. 5 bar to max. 12 bar.
• KP20.3: min. 4.5 bar to max. 12 bar.
• Hardened cover and piston.
• Repeat accuracy less than 0.005 mm.
• With locking control (pneumatic) and opening control (pneumatic)

Notes

Note: Locking control: Dynamic pressure when clamping module is locked, flow when clamping module is open. Opening control: Dynamic pressure when clamping module is open, flow when clamping module is locked. Support control via blow-out function: Dynamic pressure when fixture plate is present. The installation clamping module is opened pneumatically and locked mechanically by spring force. The pressure line can then be disconnected as desired (module is clamped pressure-free). The clamping module has five connections: 1 = pneumatic opening, 3 = pneumatic blow-out, 4 = pneumatic opening control input, 5= bleeding, 8 = pneumatic locking control input * Please follow the installation instructions.