ATORN SC HPC end mill diameter 16.0 x 32 x 46 x 92 mm, HA shaft

Name: ATORN SC HPC end mill diameter 16.0 x 32 x 46 x 92 mm, HA shaft
Brand: ATORN
SKU: 16670288

Brand: ATORN

Surface: ULTRA MS

Length: 92 mm

Art.-no. 16670288

Manufacturer article no. 11861075

EAN 4050293359992

All versions

Manufacturer information

Specification

Application

HPC end mill with uneven helical and uneven pitch for rough machining and finish machining of stainless steel, titanium alloy, nickel and copper alloys. The uneven helical pitch means that vibrations on the tool are reduced, which results in outstanding finished surfaces, while, at the same time, feed rates and cutting depths can be increased.

Execution

ultra-fine grain cemented carbide
with uneven helical and cutter distribution (35/38°)
HA straight shank
with clearance
high-performance ULTRA MS layer
with edge protection chamfer
defined cutting edge rounding
centre cutting

Advantage

rough machining and finishing with just one tool
optimum suitability for trochoidal milling
HPC geometry for maximum feed rates and running smoothness
suitable for large cutting depths

Technical information

Brand	ATORN
EAN	4050293359992
Manufacturer Part Number	11861075
Cutting material	SC
Surface	ULTRA MS
Type	VA
Number of cutting edges (Z)	4 PCS
Twist angle	35°, 38°
Tool holding device	HA parallel shank
Construction length	Normal
Cutting edge diameter	16 mm
Cutting edge length	32 mm
Clearance length	46 mm
Length	92 mm
Edge protection chamfer length	0.3 mm
Clearance diameter	15 mm
Shank diameter	16 mm
fz stainless steel	0.065 mm
Harmonized System Code	82077031
Product Group	1HJ
Gross Weight	0.200 kg

Material groups for cutting values	Description regarding DIN	Strength Class [N/mm²]	Material No.	Vc [m/min]	fz [mm/T] at diameter	Suitability
1.00 Steels
1.01 Free machining steel	9 S 20	< 900	1.0711	120-140	0.025	⚫
1.02 Structural steel	ST 37-2	<500	1.0037	130-150	0.025	⚫
1.03 Structural steel	ST 60-2	> 500	1.7735	130-150	0.025	⚫
1.04 Heat-treated steel	42 CrMo 4	<1000	1.7225	120-140	0.03	⚫
1.05 Cast iron	GS-45	<1000	1.0446	120-140	0.03	⚫
1.06 Case-hardened steel	16 MnCr 5	<1200	1.7131	-	-	⚫
1.07 Ferritic/martensitic stainless steel	X 10 Cr 13	<1100	1.4006	-	-	⚫
1.08 Heat-treated steel	43 CrMo 4	>1000	1.3563	-	-
1.09 Nitriding steel	31 CrMoV 9	<1300	1.8519	-	-
1.10 Tool steel	X 38 CrMoV 5 1	<1300	1.2343	-	-
2.00 Stainless steels
2.01 Austenitic stainless steel	G-X 2 CrNiMo 18 15	<1100	1.3953	60-80	0.02	⚫
5.00 Special alloys
5.01 Titanium alloy	TiAI5Sn2,5	<1200	3.7115	60-80	0.025	⚫
5.02 Nickel-based alloy	NiCr21Mo	<1400	2.4858	60-80	0.022	⚫
5.03 Super alloys	X45CrSi 9 3	<1400	1.4718	60-80	0.025	⚫