ATORN SC chamfer mill 90 degrees diameter 10 mm Z3 ULTRA N HB
Brand: ATORN
Surface: ULTRA N
Length: 72 mm
Art.-no. 11535100
Manufacturer article no. 11201244
EAN 4050293743531
Application
For producing 45° chamfers and for deburring in non-ferrous metals
Execution
- Large chip spaces
- defined cutting edge rounding
- 3 teeth
- High-performance ULTRA N coating for use in non-ferrous metals
 | |
Brand | ATORN |
EAN | 4050293743531 |
Manufacturer Part Number | 11201244 |
Minimum order quantity | 1 |
Cutting edge diameter | 10 mm |
Werkstückkante | 45 Grad |
Chamfer angle | 90 Degree |
Type | W |
Number of cutting edges (Z) | 3 PCS |
Insert diameter min. | 1.0 mm |
Surface | ULTRA N |
Shank diameter | 10 mm |
Tool holding device | HB parallel shank |
Cutting edge length (S) | 6.3 mm |
Length | 72 mm |
Harmonized System Code | 82079091 |
Delivery unit | 1 |
Gross Weight | 0.080 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 320-350 | 0.04-0.07 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 300-320 | 0.04-0.07 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 150-180 | 0.04-0.07 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 170-190 | 0.04-0.07 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 170-190 | 0.04-0.07 | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 180-200 | 0.04-0.07 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 220-250 | 0.04-0.07 | ⚫ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 200-230 | 0.04-0.07 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | - | - | ||
| 3.10 Graphite | C8000 | <60 | - | - | ||
| 3.11 Composite materials | - | - | ||||
Last viewed
PCE INSTRUMENTS Colour/powder meas. instr. incl. comb. probe F: 0-2,500 µm, NF: 0-2,500 µm
ORION High-perf. drill, SC TiAlN, HPC 3xD 3.4 mm x 6 mm x 62 mm HB internal
ATORN Hard foam insert w. measuring equipment set, analogue, 293 x 435 x 30 mm
MICROTEST Measuring attachments for modular micrometers 45–105 mm, groove w=4 / d=6
HK Fine dial gauge with long shaft, 0.001 mm scale 1 mm range, impact protection
WIDIA Clamping pin 15IP TX PLUS KLM46L15IP
MICROTEST Anvils for mod. micrometers 105 mm to 405 mm, metric thread, conical, pitch 1
HOFE Sidewall 3,000x800 mm, light grey segments for push-fit system
MANNESMANN DEMAG Square file 8 x 8 mm, shank diameter 6 mm
MELUTEC DAkkS without sticker for digital box inclinometer 0.02 mm/m