ATORN SC roughing cutter D 6x16x20x57mm, HB shaft 4 cutting edges, ULTRA MS
Brand: ATORN
Surface: ULTRA MS
Length: 57 mm
Art.-no. 16670240
Manufacturer article no. 11861055
EAN 4050293359794
Application
Roughing cutter with unequal cutting pitch for machining stainless steels and titanium/Ni/Co alloys.
Execution
- Ultra-fine grain cemented carbide
- HB straight shank
- With clearance
- ULTRA MS high-performance coating
- With edge protection chamfer
- Defined cutting edge rounding
- Centre cutting
Advantage
- High-performance roughing
- Optimised, positive cutting geometry
- Excellent chip removal and temperature resistance
- Maximum service life thanks to ULTRA MS coating
Brand | ATORN |
EAN | 4050293359794 |
Manufacturer Part Number | 11861055 |
Minimum order quantity | 1 |
Cutting material | SC |
Surface | ULTRA MS |
Type | VA |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 40° |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 6 mm |
Cutting edge length | 13 mm |
Clearance length | 25 mm |
Length | 57 mm |
Edge protection chamfer length | 0.1 mm |
Clearance diameter | 5.5 mm |
Shank diameter | 6 mm |
fz stainless steel | 0.023 mm |
Harmonized System Code | 82077031 |
Delivery unit | 1 |
Gross Weight | 0.022 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 120-140 | 0.028 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 130-150 | 0.028 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 130-150 | 0.028 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 120-140 | 0.028 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 120-140 | 0.028 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | - | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | - | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | - | |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | - | |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | - | |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 60-80 | 0.023 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 60-80 | 0.031 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 60-80 | 0.023 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 60-80 | 0.031 | ⚫ |
Last viewed
ATORN SC HPC TiAlN interch. head reamer TH 25.0 mm H7 VA geometry
BOBE
ORION Stepped drill bit set HSS, uncoated, straight groove, type 1.0/2.0/3.0
STAHLWILLE Handle 510 mm for 3/4 inch ratchet
BOSCH Hollow drilling bit 68 mm diameter SDS-plus 2.608.550.076
ATORN 3D articulated arm operating radius: 200 mm
ATORN Hexagon screwdriver 4.0 mm, ball end
DIEBOLD Display OneTouch I4.0 ready
KEMMLER Milling cutter holder PSK 63, 12 mm, proj. 160 mm with cooling ducts
ATORN Hexagon socket 5 mm 1/4 inch DIN 3124