ATORN pull stud BT40 60° without hole
Brand: ATORN
Length: 60 mm
Art.-no. 23693061
Manufacturer article no. 20800011
EAN 4050293200799
Application
For screwing into tool holders. They differ depending on the machine and spindle type and are used to fix the holders in the machine spindle.
Execution
- All pull studs made from material 16Mn Cr5
- Case-hardened HRc 58 ± 2
- Thread and bore hole soft, black oxide and polished
- Pull studs with O-ring = sealed
- Ref. no. 050 with hole for IC
Ref. no. 60-62 without IC
Notes
Further versions available on request (specification of machine types required).
Delivery
1x BT pull stud 60°
 | |
Brand | ATORN |
Suitable for tool holding device | SK 40 |
Design | With O-ring |
Outer diameter (D1) | 10 mm |
Bolt diameter (D2) | 17 mm |
Diameter (D) | 15 mm |
Length (L) | 60 mm |
Coolant supply | No |
Angle (α/ A) | 60 Degree |
Length of tenon (L1) | 35 mm |
HAHN+KOLB Catalogue (1)
Certificates/ Documents (1)
Last viewed
ATORN thread cutting insert 16ERA55 HC5110
Lever gauge probes, dia. 38 mm, 0.2 mm range, 0.001 mm, length 12.5 mm
WIDIA VariDrill high-perf. drill SC-TiAlN 5xD 13.4 mmx14 mmx124 mm HA internal
KNIPEX combination pliers 160 mm polished head with plastic handle
ANKE workbench with zinc sheet coating panel 1500x700x900 mm RAL 7035
ELMA noise protection cover made of stainless steel for Elmasonic Select 500
Office trolley 4871 load area 720x350mm—grey—150kg, with 3 shelves, 1 back board
ORION screw tap HSSE C 374 40° MF8 1 mm ISO 2 S 2.5xD CNC conv. P
BILZ holder piloted counterbore type H size 2 MT 1 long 17.0mm
EROGLU milling cutter holder SK50-8-130 AD