ATORN pull stud BT40 90° with hole 4 mm
Brand: ATORN
Length: 60 mm
Art.-no. 23693070
Manufacturer article no. 20800080
EAN 4050293200812
Application
For screwing into tool holders. They differ depending on the machine and spindle type and are used to fix the holders in the machine spindle.
Execution
- All pull studs made from material 16Mn Cr5
- Case-hardened HRc 58 ± 2
- Thread and bore hole soft, black oxide and polished
- Pull studs with O-ring = sealed
Notes
Further versions available on request (specification of machine types required).
Delivery
1x BT40 pull stud 90°
 | |
Brand | ATORN |
EAN | 4050293200812 |
Manufacturer Part Number | 20800080 |
Suitable for tool holding device | SK 40 |
Design | With O-ring |
Outer diameter (D1) | 10 mm |
Bolt diameter (D2) | 17 mm |
Diameter (D) | 15 mm |
Length (L) | 60 mm |
Coolant supply | Yes |
Length of tenon (L1) | 35 mm |
Harmonized System Code | 84662098 |
Gross Weight | 0.060 kg |
HAHN+KOLB Catalogue (1)
Certificates/ Documents (1)
Last viewed
GESIPA knurled steel blind rivet nuts w. countersunk head M8x18.5 mm pack of 100
BOSCH EXPERT Metal S 1242 sabre saw blade, length 150 mm, tooth pitch 8.0 mm
LESSMANN brass wire cylinder brush 4 mm, length 300 mm
ORION drilling machine vice 80 mm
DEMAG dowel anchoring kit for pillar size 5 372
ORION screw tap HSSE vaporised B 371 0° M3 0.5 mm ISO2 D 3xD
ORION revolving centring point MK 2
META zp. add. shelf f. CLIP boltless rack 1,300x500 mm w/ fastening accessories