ATORN pull stud BT50 90° with hole 6 mm
Brand: ATORN
Length: 85 mm
Art.-no. 23693071
Manufacturer article no. 20800082
EAN 4050293200829
Application
For screwing into tool holders. They differ depending on the machine and spindle type and are used to fix the holders in the machine spindle.
Execution
- All pull studs made from material 16Mn Cr5
- Case-hardened HRc 58 ± 2
- Thread and bore hole soft, black oxide and polished
- Pull studs with O-ring = sealed
Notes
Further versions available on request (specification of machine types required).
Delivery
1x BT40 pull stud 90°
 | |
Brand | ATORN |
Suitable for tool holding device | SK 50 |
Design | With O-ring |
Outer diameter (D1) | 17 mm |
Bolt diameter (D2) | 25 mm |
Diameter (D) | 23 mm |
Length (L) | 85 mm |
Coolant supply | Yes |
Length of tenon (L1) | 45 mm |
HAHN+KOLB Catalogue (1)
Certificates/ Documents (1)
Last viewed
ORION HSS hand reamer, H7, B, 6°, 26.0mm x 231mm, T=10, DIN 206
RED ROOSTER engraving needle for pneumatic marker coarse
ORION high-perf. drill bit SC TiNAlOX HPC 3xD 20.0 x 20 x 131 mm HB shank w. IC
Hydraulic compact jack model 3030, compress. force 300 kN, full piston cylinder
META large-volume basic rack 2,700x1,825x800 mm with steel panels
Hvy-ld pull-out sh. add-on, 3 full ext. sh. 2500x1280x850mm 500kg RAL 7035/5010
STAHLWILLE QuickRelease 3/8 inch extension 160 mm
ATORN screw tap HSSE vap. C 376 40° M4 0.7 mm ISO2 S 2.5xD CNC P
ATORN gripper jaws internal hardened 1/16 inchx90° M12 spacing 22 mm
RAACO 55 A8-1 insert, 8 transparent boxes 47x55x79 mm for drawers and carriers