ATORN pull stud MAS 403 for BT40 M16 90°
Brand: ATORN
Art.-no. 23692449
Manufacturer article no. 20800012
EAN 4050293200836
Application
For screwing into tool holders. They differ depending on the machine and spindle type and are used to fix the holders in the machine spindle.
Execution
- All pull studs made from material 16Mn Cr5
- Case-hardened HRC 58 ±2
- Thread and bore hole ground with soft, black-oxide finish
- Pull stud with O-ring = sealed
Brand | ATORN |
Suitable for tool holding device | SK 40 |
Design | With O-ring |
Angle (α/ A) | 90 Degree |
Certificates/ Documents (1)
Last viewed
ORION micrometers 0-100 mm, in case, electronic
ATORN collet ER25 UP dia. 9.5 mm metallic-sealed concentricity 2 µm
VSM sanding belts, 180 grain, 8 x 330 mm
ORION twist drill N HSS, steam-treated, DIN 338, 2.8 mm x 61 mm x 33 mm, 118°
DEGUSSIT round file 100 x 10 mm fine
DAkkS calibration for thread GO or NO-GO plug gauges 100-200 mm
ATORN solid carbide HPC end mill Z4 HA shaft diameter 10.0 x 22 x 72 mm
Scissor-type lifting platform mobile 300 kg supporting load RAL 5012 light blue
ORION INOX vernier callipers 150 mm with quick adjustment
ATORN insert holder AME-L-25-ASS05-M-T25