ATORN shell end mill, PM, type N, uncoated, Ø 63.0 x 40 x 27

Name: ATORN shell end mill, PM, type N, uncoated, Ø 63.0 x 40 x 27
Brand: ATORN
SKU: 14989063

Brand: ATORN

Surface: Uncoated

Art.-no. 14989063

Manufacturer article no. 11230181

EAN 4050293319972

All versions

Manufacturer information

Specification

Execution

Bore hole with longitudinal and lateral slot in conformity with DIN 138
Cutting around the circumference and on the end face

Technical information

Brand	ATORN
EAN	4050293319972
Manufacturer Part Number	11230181
Cutting material	HSSE-PM
Surface	Uncoated
Type	N
Number of cutting edges (Z)	8 PCS
Twist angle	40°
Tool holding device	With crosswise and longitudinal slot DIN 138
Cutting edge diameter	63 mm
Height	40 mm
Bore diameter	27 mm
Design of cutting edges	Smoothing
fz steel 700	0.09 mm
Harmonized System Code	82077037
Gross Weight	0.600 kg

Material groups for cutting values	Description regarding DIN	Strength Class [N/mm²]	Material No.	Vc [m/min]	fz [mm/T] at diameter	Suitability
1.00 Steels
1.01 Free machining steel	9 S 20	< 900	1.0711	70-90	0.2-0.22	⚪
1.02 Structural steel	ST 37-2	<500	1.0037	70-90	0.2-0.22	⚪
1.03 Structural steel	ST 60-2	> 500	1.7735	50-70	0.15-0.18	⚪
1.04 Heat-treated steel	42 CrMo 4	<1000	1.7225	50-60	0.15-0.18	⚫
1.05 Cast iron	GS-45	<1000	1.0446	40-50	0.12-0.15	⚫
1.06 Case-hardened steel	16 MnCr 5	<1200	1.7131	55-60	0.18-0.2	⚫
1.07 Ferritic/martensitic stainless steel	X 10 Cr 13	<1100	1.4006	35-45	0.15-0.18	⚫
1.08 Heat-treated steel	43 CrMo 4	>1000	1.3563	35-45	0.12-0.15	⚫
1.09 Nitriding steel	31 CrMoV 9	<1300	1.8519	35-45	0.12-0.15	⚫
1.10 Tool steel	X 38 CrMoV 5 1	<1300	1.2343	35-45	0.12-0.15	⚫
2.00 Stainless steels
2.01 Austenitic stainless steel	G-X 2 CrNiMo 18 15	<1100	1.3953	40-45	0.15-0.18	⚫
3.00 Non-ferrous metals
3.01 Long-chipping aluminium	AI99.9	<500	3.0305	220-450	0.18-0.22	⚪
3.02 Short-chipping aluminium	G-AISi12	<500	3.2581	120-140	0.18-0.22	⚫
3.03 Copper alloy bronze, long-chipping	CuSn4	<1200	2.1016	60-80	0.12-0.15	⚫
3.04 Copper alloy bronze, short-chipping	CuNi12Zn24	<850	2.0730	60-80	0.12-0.15	⚪
3.05 Copper alloy brass, long-chipping	Cu Zn 20	<600	2.0250	100-120	0.18-0.2	⚫
3.07 Thermoplastic	Cu Zn 39 Pb 3	<600	2.0381	75-90	0.15-0.18	⚪
3.07 Thermoplastic	PVC, Acrylglas	<100		160-180	0.15-0.18	⚪
3.08 Duroplast	Bakelit, Melamin	<150		100-120	0.12-0.15	⚪
3.09 Fibre-reinforced plastics	CFK, GFK	<1500		50-60	0.12-0.14
3.10 Graphite	C8000	<60		-	-
3.11 Composite materials				-	-
4.00 Cast metal
4.01 Grey cast iron	GG10	<260 HB	0.6010	55-70	0.16-0.19
4.02 Spheroidal graphite iron	GGG 40	<310 HB	0.7040	55-70	0.16-0.19
4.03 Ductile iron	GTW-55	<280 HB	0.8055	55-70	0.16-0.19
5.00 Special alloys
5.01 Titanium alloy	TiAI5Sn2,5	<1200	3.7115	10-30	0.09-0.12	⚫
5.02 Nickel-based alloy	NiCr21Mo	<1400	2.4858	8-25	0.09-0.12	⚪
5.03 Super alloys	X45CrSi 9 3	<1400	1.4718	8-25	0.09-0.12	⚪