ATORN solid carbide multi-tooth milling cutter, cutting edge dia. 4.0 mm length 57 mm
Brand: ATORN
Surface: RockTec PRO
Length: 57 mm
Art.-no. 16950502
Manufacturer article no. 11264055
EAN 4050293652840
Application
Multi-tooth mills for circumferential, ultra-fine finish cutting and semi-rough cutting in materials up to 65 HRC.
Execution
- Short cutters
- Cutting material, Ultra Micro fine grain
- Centre cutting
- HA shaft in line with DIN 6535
- Clearance
- type H
- With RockTec PRO coating
Advantage
- optimum chip removal and temperature resistance
- Optimised geometry for machining hard materials
- maximum service life thanks to RockTec PRO coating
Brand | ATORN |
EAN | 4050293652840 |
Manufacturer Part Number | 11264055 |
Cutting material | SC |
Surface | RockTec PRO |
Type | H |
Number of cutting edges (Z) | 6 PCS |
Twist angle | 45° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 4 mm |
Cutting edge length | 5 mm |
Clearance length | 14 mm |
Length | 57 mm |
Clearance diameter | 3.8 mm |
Shank diameter | 6 mm |
fz hard 65 HRC | 0.035 mm |
Product Group | 152 |
Gross Weight | 0.023 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 100-180 | 0.045 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 100-180 | 0.045 | ⚪ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 90-140 | 0.045 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 80-120 | 0.045 | ⚫ | |
Last viewed
MULTIFIX change holder D CD 32170
ORION metal circular saw blade HSS coarse tooth 50 mm x2 mm x13 mm C (V+F) T=32
Recyc.mat. collector f.ext.use w.ashtr. HxWxD1050x450x450mm vol. f.recyc. 90 l
CARTEC hoist ring M30 5 t
BOSCH Starter Set ADVANCED 2x ProCORE 18V/4Ah compatible with 18V Bosch battery
KUKKO 2-legged extractor, type 20-30, clamping width 350 mm
ORION cemented carbide gauge block tolerance class 1 1.001 mm
DAKKS calibration certificate with badge, go or no-go thread gauge >3-50 mm
CLIP-O-FLEX support rail 1495 mm of alu., naturally anodised pre-drilled
DIEBOLD shrink-fit chuck, slim, HSK 63 A x 12 mm A = 150 mm