DK FIXIERSYSTEME SPANNFIX ECO KMG starter kit M609 for tactile measuring tasks

Application

This universal starter kit is ideal for installing components for tactile measuring tasks, e.g. on 3D coordinate measuring instruments. The Spannfix ECO system is modular, can be expanded with additional components at any time and therefore offers maximum flexibility.

Execution

• 1x SPANNFIX ECO base plate M6 WxDxH 500 x 250 x 20 mm with 50 mm grid (dk article number 395030)
• 3x clamping claw (dk article number 281440) + 3x M10 base rail 105 mm with M6 screw for base plate (dk article number 322010)
• 1x M10 hexagon column set AF 17, 4x 25 mm (dk article number 322200), 4x 35 mm (dk article number 322300, 4x 50 mm (dk article number 322400) and 4x 100 mm (dk article number 304400)
• 2x quick-change mount M10/SWA8 (dk article number 329500) + 2x 90° centring tips with quick-change mount SWA8, dia. 25 mm (dk article number 303700)
• 1x SWA8 flat supporting surface straight stop (dk article number 303810) + 1x SWA8 flat supporting surface for corner stop 40 mm (dk article number 303815) + 1x SWA8 V-shaped supporting surface 40 mm (dk article number 323400) + 1x SWA8 V-shaped supporting surface 8 mm (dk article number 323500)
• 2x M10 toggle locator to compensate for mould inclines ±15° (dk article number 323000) + 2x M10 moulded support with 90° tapered tip, dia. 10 (dk article number 322600) + 2x M10 moulded support with taper radius 5 mm (dk article number 322700)
• 4x each retaining plate for M6 columns 50 mm (dk article number 353700) and 75 mm (dk article number 353800) for mounting on M10 columns, toggle locators, moulded and quick-change mounts
• 6x each column dia. 6 with M6 thread 75 mm (dk article number 368300), 125 mm (dk article number 368500) for spring compressor or as stop, with hexagon socket + 4x each spring compressor dia. 6, 50 mm (dk article number 302800), 75 mm (dk article number 302900) self-locking and individually adjustable
• 3x M8 x 30 screw, 3x M10 x 30 screw and 3x M12 x 30 screw for adjustable clamp, 3x each washer for M8, M10 and M12 screws, 2x each open-end wrench AF 13/15 and 17/19, 1x each of hex key AF 2.5 for SWA8, AF 3 for round columns, AF 5 for base rails and AF 6, 8 and 10 for adjustable clamps
• 2x 3D central articulated arm with operating radius 170 mm, male thread M8 bottom/M6 top + 2x each thread adapter M6 male/M8 female for 3D central articulated arms (dk article number 275000), M6 male/M10 female for hexagon columns (dk article number 275010) and SWA8 male/M6 female for 3D central articulated arms (dk article number 246411)

Advantage

• Quick-change system enables clamping elements to be used on different measuring machines, thus reducing costs