For detailed information, other images and documents, please select individual articles from the following table.
ORION T1 individual test pin, 8.00-8.99 mm in increments of 0.01 mm
Gauge steel
You need more information or have not found your desired product?
Products
You need more information or have not found your desired product?
Application
For measuring bore hole clearances, bore diameters, angularity of bores etc.
Execution
- Ground and lapped
- Hardened 60-64 HRC
- Diameter of 0.300 to 0.999 mm with a length of 40 mm; from diameter 1.000 mm with a length of 70 mm
- from diameter 3.00 mm: One end with 30-45° chamfer; other end deburred with diameter marking on end face
- from dia. 1.5 to 2.999 mm: with 30-45° chamfer on both sides; diameter marking on the outer surface
- from dia. 1.00 to 1.499 mm: with 30-45° chamfer on both sides; without diameter marking
- up to 0.999 mm: both ends deburred, without diameter marking
Notes
Engraving is only possible from approx. 6 mm diameter and only with a few characters.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!