DIEBOLD ThermoGrip® shrink collets TER 25 d 16 according to DIN 6499
Brand: DIEBOLD
Length: 34 mm
Art.-no. 23325156
Manufacturer article no. 64.TER.25.16
Application
Areas of application in collet chuck: ER standard chucks with standard clamping nuts can be used. The collet chuck is impervious to coolant, which prevents contamination of the clamping cone.
Execution
- Concentricity < 3 μm.
- Highest retention forces.
- Highest dimensional stability.
- Excellent changeover precision.
Notes
Accessories required for Diebold horizontal heat-shrink units when using the TER shrink collets: Ref. no. 23325230-232 and 23325250-254 accessories required for Diebold vertical heat-shrink units when using the TER shrink collets: Ref. no. 23325220 and 23325240-244.
Delivery
1x shrink collet.
 | |
Brand | DIEBOLD |
Manufacturer Part Number | 64.TER.25.16 |
Collet type | TER-25/430 E |
Clamping diameter (d) | 16 mm |
Min./max. clamping range | 3-16 mm |
Outer diameter (D) | 26 mm |
Length (L) | 34 mm |
Harmonized System Code | 84661020 |
Gross Weight | 0.060 kg |
Last viewed
ATORN thread milling cutter SC-TIAlN 1.5 mm 10.0 mm 21.8 mm
HK wheeled workbench HxWxD 850 x 1140 x 650 mm RAL 7035/RAL 5010, with doors
Factory calibration for callipers 0-300 mm
ATORN location pin made from hardened steel M6
ergolastec workplace mat with bubble textured surface LxWxH 1,350 x 887 x 20 mm
HOFE shlv. rack add-on bay 750x300 mm, 6 light grey shlvs, 220 kg HKA25307AM
EICHINGER tool box, steel, 600 kg, 500 l, pure orange
ANKE combi workbench 623 V panel zinc sheet coating 2000x700x900 mm RAL7035/5010
ATORN synchronous thread mould HSSE-PM TiN DIN 376 M12 x 1.75 mm ISO 2 3xD
ATORN double open-end wrench 5.5 x 7 mm DIN 3110