METRON MMV22 display unit with calibration switch for 4 sensors

Application

Mobile measuring and display unit for logging and displaying measured values in combination with electronic force sensors, torque sensors, strain gauges and load cells.

Execution

• 4½-digit LCD display with 10 mm digit size
• Membrane keypad with six function keys
• Sensor input: 6-pin LEMO plug connection
• automatic detection of up to four sensors
• Data logger (max. 100 values) as standard
• Peak value storage
• incl. USB stick with demo software TWedge

Advantage

• Adjustable samplings rates of up to 500 measurements per second
• Switchable signal input ranges for sensors with different parameters
• Measuring accuracy of 0.1% for high accuracy requirements

Notes

For characteristic curve comparison, the sensors must be adjusted for the measuring and display unit. Automatic sensor detection occurs via an internal bridge circuit in the LEMO connector. Both are implemented by the manufacturer. A total of up to four sensors can be connected to the MMV 22 alternately. A terminal program is required for data transfer. Not included in the scope of delivery.