ORION HPC multi-tooth mill, diameter 12.0 x 12 x 28 x 84 mm, HA shaft
Brand: ORION
Surface: TiSiN
Length: 84 mm
Art.-no. 16931124
Manufacturer article no. 16931124
EAN 4053625351329
Application
Multi-tooth mill for circumferential machining, fine finishing and semi-roughing up to 68 HRC.
Execution
- solid carbide ultra-fine grain
- TiSiN-coated
- Unequal twist angle
- HA shaft in line with DIN 6535
- type H
- 0° chip angle
- cutting edge finish
- centre cutting
Advantage
- optimum chip removal and temperature resistance
- Maximum service life deu to TiSiN coating
Notes
At >60 HRC: ae = 0.07xD. Face cut from Z6 is only possible to a limited extent.
Brand | ORION |
EAN | 4053625351329 |
Manufacturer Part Number | 16931124 |
Cutting material | SC |
Surface | TiSiN |
Type | H |
Number of cutting edges (Z) | 6 PCS |
Twist angle | 45° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 12 mm |
Cutting edge length | 28 mm |
Length | 84 mm |
Shank diameter | 12 mm |
fz hard 65 HRC | 0.025 mm |
Harmonized System Code | 82077010 |
Gross Weight | 0.130 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 160-180 | 0.02 | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 160-180 | 0.02 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 150-170 | 0.02 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 150-170 | 0.02 | ⚫ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 155-175 | 0.02 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 135-155 | 0.02 | ⚫ | |
HAHN+KOLB Catalogue (1)
Last viewed
Folding-door chest, 1950x1500x600 mm with 4 galvanised shelves, RAL 7035
ORION collet Erickson DK-S, diameter 2.25 mm
ORION cemented carbide gauge block tolerance class 1 5.00 mm
ATORN indexable insert DNMG 110404-FP1 ACP25T-1
UVEX infrared safety goggles pheos CX2 1.7
ATORN multi-twist drill DIN 338 9.0 mm x 125 mm x 81 mm 135° 3 clamping surfaces
ATORN end mill, length 73 mm, shank 10 mm, cutting edge diameter 10 mm
ATORN thread cutting insert 11ER28UN HC5625
GÜNZBURGER step ladder, two-sided access, 2x5 steps
ATORN boring bar, positive, with internal cooling A25R SVQBR 16