RÖHM safety key, 12 mm, for chuck 200
Brand: RÖHM
Length: 160 mm
Art.-no. 22471212
Manufacturer article no. 242174
EAN 4019208066790
Application
The key has to be firmly pressed into the chuck drive and held there until the clamping procedure is complete. When the pressure is relieved, the key is automatically ejected.
Execution
- Ref. no. 210-219 with ejector pin, for lathe chucks with male square drive (tapered rod chuck)
Brand | RÖHM |
EAN | 4019208066790 |
Manufacturer Part Number | 242174 |
For chuck diameter | 200 mm |
For lathe chucks with external square | 12 mm |
Length | 160 mm |
Harmonized System Code | 82041100 |
Gross Weight | 0.835 kg |
HAHN+KOLB Catalogue (1)
Certificates/ Documents (1)
Last viewed
ORION end mill HSSE8 TIALN, type HR, short, diameter 13.0 mm
DYMO vinyl tape 12 mm x 5.5 m, white on red
FAHRION collet chuck DIN6343 185E 38, round
ATORN rolling tool case with VDE tool assortment, 44 pcs.
ORION twist drill VA HSSE, DIN 338, 6.6 mm x 101 mm x 63 mm, 130°
KNIPEX circlip pliers A22 185 mm 45-degree angled for external rings
RÖHM CAPTIS GTG 65 collet D63.0 mm smooth
ATORN SC HPC TiAlN interch. head reamer BH 27.0 mm H7 VA geometry
Serving trolley 32931, with bins, load cap. 250 kg, load area 630x470 mm