SC end mill with IC, clearance diameter 4.7 mm, clearance length 20 mm
Brand: ATORN
Surface: Uncoated
Length: 50 mm
Art.-no. 16655020
Manufacturer article no. 11869181
EAN 4050293640342
Application
End mill with uneven pitch for roughing and finishing of non-ferrous metals with maximum machining performance.
Execution
- Solid carbide ultra-fine grain
- Straight shank in line with DIN 6535 HA
- With chip breakers on the front
- Defined edge rounding of the cutting edge
- centre cutting
- With edge protection radius
- Polish sanding
- with internal cooling
Advantage
- High material removal rate
- Uneven pitch reduces vibrations
- Corner radius increases the service life
- High-gloss polished cutting edges for better chip removal
- Ideal for NF metals and plastics
Brand | ATORN |
EAN | 4050293640342 |
Manufacturer Part Number | 11869181 |
Cutting material | SC |
Surface | Uncoated |
Type | W |
Number of cutting edges (Z) | 3 PCS |
Twist angle | 40° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 5 mm |
Cutting edge length | 15 mm |
Clearance length | 20 mm |
Length | 50 mm |
Clearance diameter | 4.7 mm |
Shank diameter | 6 mm |
fz aluminium | 0.022 mm |
Harmonized System Code | 82077031 |
Product Group | 1HJ |
Gross Weight | 0.025 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 1000-null | 0.044 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 750-null | 0.04 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 240-null | 0.028 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 240-null | 0.028 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 220-null | 0.022 | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 220-null | 0.022 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 350-null | 0.025 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 280-null | 0.018 | ||
Last viewed
ORION collet chuck 185E (F66) DIN 6343 RD 8.0 mm smooth
LAPPORT INDIGA composite bench stone 100 x 25 x 13 mm rough/fine
RECORD-ARKANSAS half-round file 100 x 10 x 5 mm
EROGLU thread cutting insert, size 1, M5, without slip clutch
ZARGES LM stepladder, ladder length 2.40 m 2 x 10 steps
ATORN thread cutting insert 16ELG60 HC5625
ATORN solid carbide slotting cutter ultra T=2 15.70 mm shaft DIN 6535 HB
WIDIA VariDrill high-perf. drill, SC-TiAlN 3xD 8.8mm x 10mm x 89mm HA external
ATORN thread cutting insert holder for thread type U SER2525M22U
ATORN gauge block, 1.41 mm, tolerance class 1, ceramic