TESA GT 21 HP electronic length measuring probe -/+0.2mm inst lngt 61.5mm 0.63N

Name: TESA GT 21 HP electronic length measuring probe -/+0.2mm inst lngt 61.5mm 0.63N
Brand: TESA TECHNOLOGY
SKU: 39655031

Brand: TESA TECHNOLOGY

Art.-no. 39655031

Manufacturer article no. 03230036

All versions

Specification

Application

Particularly accurate linearisation in +/- 0.2 mm around the zero point. This results in inherent errors between 0.05 and 0.1 µm. For highly accurate measurements.

Execution

Particularly accurate ball-bearing slide
Clamping shaft diameter 8 mm, can be clamped along entire length
Carbide gauge slide M2.5 with ball diameter 3 mm
5-pin plug in line with DIN 45322, cable length 2 m
Mechanical or vacuum lifting of measuring pins, depending on version

Advantage

Insensitive to lateral forces and temperature fluctuations
Excellent electromagnetic shielding

Notes

When using high-precision probes, care must be taken to ensure a thermally stable environment and the damping of oscillations and vibrations.

Delivery

Measuring probe, test report with declaration of conformity

Technical information

Brand	TESA TECHNOLOGY
Manufacturer Part Number	03230036
Model	GT 21 HP
Compatibility length measurement scanner	TESA
Max. spindle travel	4.3 mm
Measuring range of electronic length measuring technology	+/- 0.2 mm
Spindle lift	Manual
Measuring pin adjustment	Spring force
Cable output direction	Axial
Material of bellow	Nitrile
Measuring span of electronic length measuring technology	0.4 mm
Measurement force	0.63 N
Repetition standard deviation acc. to DIN 1319	0.01 µm
Front end position of spindle	-1.2 mm
Max. linearity error (L in mm, measured from electric zero point)	0.07 µm + (0.4 x L) µm
Installation length	61.5 mm
Cable length	2 m
Harmonized System Code	90318020
Gross Weight	0.150 kg

Documents

Product information

HAHN+KOLB Catalogue

Certificates/ Documents

Accessory

Additional accessory:

Product

Description

Quantity

Price per

Price

DAkkS calibration for inductive plunger with contact point 0-10 mm

Calibration group CH electronic length measuring probes and display units

MELUTEC

Art.-no. 30000156

x 1 Piece

labelling/lettering/engraving up to 16 chars to be specified in shopping basket

Labelling/lettering/engraving up to 16 characters (more than 16 characters available upon request)

Art.-no. 30000887

x 1 Piece

The packaging unit defines the number of articles in one package:

For example:
1x gloves: 1 pair (2 pieces)
1x bit set: 1 set (10 pieces)
1x screw: package (50 pieces)

In many areas our 8 - digit article number is structured the following way:

First 5 digits = material no . / Product no . + last 3 digits = dimensions / diameter / article no.

For example, solid carbide end mills 3x5x50mm first 5 digits 16851 + last 3 points 050

article no.: 16851050

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart.