TESA GT 612-A elec. length meas. probe, +/- 5 mm, inst. length 81 mm, 2.00 N

Name: TESA GT 612-A elec. length meas. probe, +/- 5 mm, inst. length 81 mm, 2.00 N
Brand: TESA TECHNOLOGY
SKU: 39655465

Brand: TESA TECHNOLOGY

Art.-no. 39655465

Manufacturer article no. 03290174

All versions

Specification

Application

For a wide variety of standard applications in multi-point metrology. Reliable and therefore ideally suited to automation applications. For recording measured values, the length measuring probes should be pressurised with compressed air and extended forwards. The probes are retracted by a release spring as soon as compressed air is no longer applied.

Execution

Straight compressed air connection at the rear
precise, ball-guided measuring pin
Clamping shank diameter 8 mm, can be clamped along entire length
Carbide gauge slide M2.5 with ball diameter 3 mm
5-pin plug in accordance with DIN 45322, cable length 2 m
Lifting of measuring pins using a release spring, infeed using compressed air. This makes the system particularly reliable.

Advantage

insensitive to lateral forces and temperature fluctuations
excellent electromagnetic shielding
Version without bellows, lower measuring forces possible
Pack of 10 with outstanding value

Notes

TESA check. Also available in a DC version with +/- 15 V or 0-24 V power supply and analogue DC output on request and for an extra charge

Delivery

10x measuring probes, test report with declaration of conformity

Technical information

Brand	TESA TECHNOLOGY
Manufacturer Part Number	03290174
Model	GT 612A
Compatibility length measurement scanner	TESA
Max. spindle travel	10.3 mm
Measuring range of electronic length measuring technology	+/- 5 mm
Spindle lift	Automatic due to spring return
Measuring pin adjustment	Compressed air
Cable output direction	Axial
Measuring span of electronic length measuring technology	10 mm
Measurement force	1 N
Repetition standard deviation acc. to DIN 1319	0.05 µm
Min./max. operating pressure	1.0-6.0 bar
Max. linearity error (L in mm, measured from electric zero point)	1 µm + (4 x L) µm
Installation length	81 mm
Cable length	2 m
Correction factor to GT 21/22	2.5
Supply up to electronic zero point	5 mm
Harmonized System Code	90318020
Gross Weight	1.096 kg

Documents/CAD data

Product information

CAD data (available after login)

Certificates/ Documents (1)

Data sheet

Accessory

Additional accessory:

Product

Description

Quantity

Price per

Price

DAkkS calibration for inductive plunger with contact point 0-10 mm, 10 pack

Calibration group CH electronic length measuring probes and display units

MELUTEC

Art.-no. 30003010

x 1 Set

The packaging unit defines the number of articles in one package:

For example:
1x gloves: 1 pair (2 pieces)
1x bit set: 1 set (10 pieces)
1x screw: package (50 pieces)

In many areas our 8 - digit article number is structured the following way:

First 5 digits = material no . / Product no . + last 3 digits = dimensions / diameter / article no.

For example, solid carbide end mills 3x5x50mm first 5 digits 16851 + last 3 points 050

article no.: 16851050

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart.