TESA GTL 22DC electronic length-measuring probe with analogue output

Name: TESA GTL 22DC electronic length-measuring probe with analogue output
Brand: TESA TECHNOLOGY
SKU: 39828422

Brand: TESA TECHNOLOGY

Art.-no. 39828422

Manufacturer article no. 03230058

EAN 7630041112726

All versions

Manufacturer information

Specification

Application

Suitable for applications in multipoint measuring technology. For direction connection to an SPC measuring computer, interface with an analogue input or to a computer with an analogue card.

Execution

Precise, ball-guided measuring pin
Clamping shaft diameter 8 mm, can be clamped along entire length
Supply voltage ±10 to ±15 V DC

Advantage

Highly precise tactile measuring element in multi-point measuring systems and automation
Measured values output as analogue direct voltage signal
High measuring rate

Notes

Length-measuring probe with modified sensitivity, raised zero point, 24 V supply voltage, shorter or longer connection cable available on request
WARNING: Standard extension cables cannot be used with the DC probes.

Delivery

Measuring probe, test report with conformity declaration

Technical information


Brand	TESA TECHNOLOGY
EAN	7630041112726
Manufacturer Part Number	03230058
Model	GTL 22 DC
Max. spindle travel	4.3 mm
Measuring span of electronic length measuring technology	4 mm
Output voltage (+/-)	2 V/DC
Sensitivity	1 V/mm
Spindle lift	Manual, Vacuum
Measuring pin adjustment	Spring force
Cable output direction	Radial
Material of bellow	Viton
Max. linearity error (L in mm, measured from electric zero point)	0.2 µm + (3.5 x L²) µm
Measurement force	0.63 N
Installation length	47 mm
Cable length	2 m
Ball diameter	3 mm
Measuring range of electronic length measuring technology	+/- 2 mm
Shank diameter	8 mm
Plug connector	5-pin in accordance with DIN 45322
Current consumption	15 mA
Front end position of spindle	-2.2 mm
Repetition standard deviation acc. to DIN 1319	0.1 µm
Harmonized System Code	90318020
Gross Weight	0.174 kg

Documents/CAD data

Product information

CAD data (available after login)

Certificates/ Documents (2)

Data sheet

Technical data sheet

Accessory

Additional accessory:

Product

Description

Quantity

Price per

Price

DAkkS calibration for incremental plunger with contact point 0-10 mm

Calibration group CH electronic length measuring probes and display units

MELUTEC

Art.-no. 30000157

x 1 Piece

labelling/lettering/engraving up to 16 chars to be specified in shopping basket

Labelling/lettering/engraving up to 16 characters (more than 16 characters available upon request)

Art.-no. 30000887

x 1 Piece

The packaging unit defines the number of articles in one package:

For example:
1x gloves: 1 pair (2 pieces)
1x bit set: 1 set (10 pieces)
1x screw: package (50 pieces)

In many areas our 8 - digit article number is structured the following way:

First 5 digits = material no . / Product no . + last 3 digits = dimensions / diameter / article no.

For example, solid carbide end mills 3x5x50mm first 5 digits 16851 + last 3 points 050

article no.: 16851050

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart.