For detailed information, other images and documents, please select individual articles from the following table.
Products
Application
Pneumatic clamping station for clamping with optimised setup time on machine tables with slot spacings of 63, 100 and 125 mm. Attached using M12 hexagon socket head cap screws. With at least two alignment holes for alignment. The centre distance for the clamping modules is 200 mm. The pneumatic quick-action coupling plug is pre-assembled.
Execution
- Pneumatic unlocking.
- Operating pressure for opening:
- KP10.3 min. 5 bar.
- KP20.3 min. 4.5 bar.
- Unhardened steel.
- Repeat accuracy less than 0.005 mm.
Advantage
- Low overall height
Notes
* Please follow the installation instructions. It is recommended to use a maintenance unit when operating the clamping station. A suitable product can be found under order no. 301929 in the "single and multi-point clamping systems" section of the AMF catalogue.
Delivery
1x pneumatic 6-point clamping station
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!